John Deere 318E, 319E, 320E, 323E Skid Steer & Compact Track Loader Pdf Technical Repair Service Manual- TM13013X19

John Deere 318E, 319E, 320E & 323E Technical Repair Service Manual – TM13013X19

One manual covers four closely related E-Series machines, but the repair work is not interchangeable in every detail. The John Deere 318E and 320E are skid steer loaders, while the 319E and 323E are compact track loaders. Their shared E-Series architecture makes TM13013X19 a valuable workshop reference, particularly when a repair involves the hydraulic system, powered wheels or tracks, axles, engine, transmission, loader structure, or electro-hydraulic controls.

This John Deere 318E, 319E, 320E and 323E Skid Steer & Compact Track Loader Repair Technical Manual is the repair publication for machines equipped with EH (electro-hydraulic) controls within the applicable PIN ranges. The identified manual contains detailed component procedures, technical specifications, illustrations, safety information, torque values and system-specific repair instructions.

Machine Information at a Glance

Model	Machine Type	Key Published Rating	Power
318E	Skid Steer Loader	1,950 lb (885 kg) rated operating capacity	47.1 kW (63 hp) gross
319E	Compact Track Loader	6,143 lb (2,789 kg) tipping load	51.7 kW (69 hp) gross
320E	Skid Steer Loader	2,190 lb (994 kg) rated operating capacity	51.7 kW (69 hp) gross
323E	Compact Track Loader	7,400 lb (3,360 kg) tipping load	54.8 kW (74 hp) gross

The E-Series specifications distinguish the machines by size and configuration: the 318E and 320E are wheeled skid steers, while the 319E and 323E are compact track loaders. Published comparisons list the 318E at approximately 3,178 kg operating weight and the 320E at approximately 3,246 kg, while the 319E and 323E are around 4,286–4,358 kg depending on configuration.

Applicable Machine and PIN Coverage

Model	PIN Coverage Identified for TM13013X19
John Deere 318E	1T0318E***G253889 and later applicable PINs
John Deere 319E	1T0319E***G254929 and later applicable PINs
John Deere 320E	1T0320E***G254913 and later applicable PINs
John Deere 323E	1T0323E***G254917 and later applicable PINs

Important: TM13013X19 is associated with the EH-control configuration. Check the machine PIN and control configuration before using the manual for a repair. Published manual listings identify these four model/PIN combinations specifically.

What Makes TM13013X19 Useful in the Workshop?

These machines may look straightforward from the outside, but the repair path can change considerably depending on whether the fault involves a wheeled skid steer or tracked loader. A 318E with a drive problem may lead you toward powered wheels, axle components and hydraulic drive systems, while a 319E or 323E can require attention to the track system and associated components.

TM13013X19 organizes the repair information around those machine systems instead of treating all four models as one generic loader.

• Hydraulic performance drops: investigate the main hydraulic system, loader hydraulic circuit and related components using the applicable service procedures.
• The loader will not lift or tilt correctly: follow the hydraulic-system information to separate control, pump, circuit and actuator problems.
• Wheeled machine develops a drive fault: use the powered-wheel, axle and transmission-related sections to investigate the drivetrain.
• Tracked loader has track-system problems: the manual contains a dedicated track-system section for the 319E and 323E configuration.
• Engine requires removal: engine removal and installation procedures are included rather than limiting the manual to routine maintenance.
• Cooling or intake performance changes: engine auxiliary-system information covers cooling, intake, exhaust and external fuel-system areas.
• EH control function becomes unreliable: the manual's applicable control-system information helps technicians approach the mechanical and hydraulic systems associated with electro-hydraulic operation.
• Loader attachment needs service: the loader section covers the attachment coupler, loader frame and hydraulic system.

Technical Repair Coverage

Manual Section	Principal Service Subjects
General Information	Safety information, service practices, specifications and torque values
Wheels / Tracks	Powered wheels and fastenings; track system service
Axles & Suspension	Drive axle housing and support, axle shafts, bearings and reduction gears
Transmission	Controls linkage, flywheel coupler and hydraulic-system-related transmission service
Engine	Engine removal, installation and associated service procedures
Engine Auxiliary Systems	Cooling, intake, external exhaust and external fuel supply systems
Frame / Supporting Structure	Frame-related removal, installation and structural service
Operator's Station	Operator enclosure, seat and seat belt, heating and air conditioning
Sheet Metal & Styling	Hood and engine-enclosure service
Main Hydraulic System	Hydraulic-system service and troubleshooting information
Loader	Attachment coupler, loader frame and loader hydraulic system
Dealer-Fabricated Tools	Special service-tool information applicable to specified repair procedures

The published table of contents confirms coverage of wheels/tracks, axles, transmission, engine, engine auxiliary systems, frame, operator station, main hydraulics, loader components and dealer-fabricated tools.

Hydraulic and Loader Troubleshooting

Hydraulics are central to the work performed by these E-Series loaders. Lift, tilt and attachment functions depend on the hydraulic system delivering the required pressure and flow through the appropriate control circuits. When a loader arm becomes slow or an attachment stops responding normally, changing the hydraulic pump immediately can be an expensive way to discover that the problem was elsewhere.

The manual provides dedicated information for the main hydraulic system as well as the loader hydraulic system. This makes it useful for investigating symptoms such as:

• Slow boom or loader-arm movement
• Weak bucket or attachment response
• Hydraulic function that becomes inconsistent under load
• Suspected hydraulic pressure or flow problems
• Loader control-valve concerns
• Hydraulic component removal and installation
• Attachment-coupler hydraulic issues

318E & 320E Skid Steer Service

The 318E and 320E are the wheeled members of this group. Published E-Series data places the 318E at a 1,950 lb rated operating capacity and the 320E at 2,190 lb, with gross engine power of approximately 63 hp and 69 hp respectively.

For these machines, the repair information is particularly relevant when work involves powered wheels, drive axles, bearings, reduction gears, transmission components, loader hydraulics or frame-mounted assemblies. The manual's wheels, axles and transmission sections allow the technician to approach a drive complaint from the relevant mechanical system rather than relying on generic skid-steer information.

319E & 323E Compact Track Loader Service

The 319E and 323E use the compact-track-loader configuration. Published comparisons list tipping loads of approximately 6,143 lb for the 319E and 7,400 lb for the 323E, with gross power of approximately 69 hp and 74 hp respectively.

The dedicated Track System section is therefore particularly important when servicing these machines. Track-related repairs can involve components that do not exist on the wheeled 318E and 320E, so having the appropriate CTL-specific procedure available can prevent technicians from applying the wrong service method.

Engine and Auxiliary-System Repairs

The manual does not stop at the loader's hydraulic and drivetrain components. Engine service includes removal and installation, while the engine auxiliary section addresses the systems surrounding the power unit.

This includes cooling systems, intake systems, external exhaust systems and external fuel supply systems. These sections are useful when an engine-related complaint is accompanied by overheating, restricted intake, exhaust-system concerns, fuel-supply problems or the need to remove the engine from the machine.

Axles, Bearings and Reduction Gears

Drive-system service can become considerably more involved once a machine has accumulated substantial operating hours. The manual specifically identifies the drive axle housing and support along with axle shafts, bearings and reduction gears.

This is valuable for diagnosing or rebuilding components when symptoms include unusual drivetrain noise, excessive play, damaged bearings, abnormal wheel behaviour or a suspected reduction-gear problem. Having the component-level information available before disassembly can also make it easier to plan the repair and identify the parts and tools required.

Operator Station, HVAC and Machine Structure

TM13013X19 also extends into areas that are sometimes overlooked when describing a loader repair manual. The operator-station section includes the operator enclosure, seat and seat belt, heating and air conditioning, while the frame and supporting-structure section provides information for structural service.

The inclusion of these areas makes the manual useful for a broader maintenance program rather than only emergency hydraulic or drivetrain repairs.

Manual Specifications

Manual Detail	Information
Publication / Technical Manual Number	TM13013X19
Manual Type	Repair Technical Service Manual
Models	318E, 319E, 320E and 323E
Control Configuration	EH / Electro-Hydraulic Controls
Machine Types	Skid Steer Loaders and Compact Track Loaders
Language	English
Format	PDF
Identified PDF Edition	431 pages
PDF Features	Searchable, printable and illustrated technical reference
Primary Content	Repair procedures, specifications, safety information, component service and technical illustrations

There are different online reproductions of TM13013X19 with conflicting page counts, including listings for 368, 431 and 612 pages. For that reason, the 431-page figure above is tied specifically to the identified PDF edition, rather than being presented as a universal page count for every reproduction.

Important Distinction: Repair Manual vs. Diagnostic Manual

When purchasing technical documentation for these machines, it is worth checking exactly what document is being offered. TM13013X19 is identified as the Repair Technical Manual. Some listings separately identify diagnostic documentation containing electrical wiring diagrams and advanced diagnostic information.

That distinction matters when the repair requires a wiring schematic or diagnostic-specific publication. The TM13013X19 repair manual should therefore be matched to the exact documentation requirement rather than assuming every John Deere technical publication contains identical information.

PDF Features for Workshop Use

• English-language repair technical manual.
• Searchable PDF format for locating service subjects quickly.
• Printable pages for workshop reference.
• Zoom capability for examining detailed component illustrations.
• Technical sections arranged by machine system.
• Applicable to both wheeled skid steer and tracked E-Series configurations.
• Includes safety information and torque references.
• Useful for component removal, installation, inspection, repair and reassembly.

Frequently Asked Questions

What machines are covered by John Deere TM13013X19?

The manual is identified for the John Deere 318E, 319E, 320E and 323E skid steer and compact track loader models with the applicable EH-control configuration.

Which models are skid steer loaders?

The 318E and 320E are skid steer loaders. The 319E and 323E are compact track loaders.

Does TM13013X19 cover EH controls?

Yes. This publication is identified for the EH / electro-hydraulic control configuration of these E-Series machines.

Does the manual cover the track system?

Yes. A dedicated Track System section is included for the compact track loader configuration.

Does the manual include hydraulic repair information?

Yes. It contains Main Hydraulic System and Loader Hydraulic System sections covering hydraulic service and related repair information.

Can I use this manual for engine removal?

Yes. The contents specifically include engine removal and installation information, along with supporting engine auxiliary-system sections.

Does TM13013X19 cover axles and reduction gears?

Yes. The axle section includes the drive axle housing and support as well as axle shafts, bearings and reduction gears.

Does the manual include HVAC information?

Yes. Heating and air conditioning are included under the operator-station service information.

How many pages is the PDF?

The specific edition identified for this listing is 431 pages. Other reproductions of the same publication number are listed with different pagination, so the actual file edition should be checked before purchase.

What is the rated operating capacity of the 318E?

Published E-Series comparison data lists the 318E at approximately 1,950 lb (885 kg) rated operating capacity.

What is the rated capacity of the 320E?

Published comparison data places the 320E in the 2,190 lb (994 kg) rated operating-capacity class.

What are the tipping loads of the 319E and 323E?

Published specifications list approximately 6,143 lb (2,789 kg) tipping load for the 319E and 7,400 lb (3,360 kg) for the 323E.

John Deere E-Series Repair Manual for 318E, 319E, 320E & 323E

The four machines covered by TM13013X19 share an E-Series design philosophy, but the service requirements are not identical. The 318E and 320E use wheels; the 319E and 323E use tracks. Their capacity and power ratings also step upward through the range. That is why a useful repair manual needs to identify the individual model and configuration rather than simply calling the equipment a generic skid steer.

With coverage extending from hydraulic and loader systems to tracks, powered wheels, axles, transmission, engine, cooling, fuel, electrical-related machine systems, frame, operator station and HVAC, this John Deere technical manual is suited to technicians and owners carrying out anything from component inspection and maintenance to more involved repair and rebuilding work.

If your machine matches the applicable PIN and EH-control configuration, the John Deere 318E, 319E, 320E and 323E Skid Steer & Compact Track Loader PDF Technical Repair Service Manual TM13013X19 provides a model-focused workshop reference for diagnosing problems, preparing repairs and servicing the machine correctly.